Yesterday Apple announced the new iPhone 3Gs, and I’ll bet that a bunch of people will suddenly have the need for instructions for pairing their phone.  Here they are:

1. Enter the vehicle in the driver’s position.  Vehicle must be parked outside in a safe place with the engine running. Be sure you have your approved wireless phone and your wireless phone owner’s manual. 
2. The Bluetooth Interface Module should be attached to the connector, located in the center armrest.
3. Locate the Mercedes-Benz emblem on the front of the Bluetooth Interface Module and push down on it for 3 seconds. Blue lamps on the front of the module will begin to blink rapidly, then release.
4. Pick up your wireless phone and set up your phone to pair to a Bluetooth device as per your wireless phone owner’s manual. During this process your phone will ask you for a code, enter 62872 on your PHONE’S keypad. Attention S and CL customers, 2 Bluetooth devices will appear as found on your wireless phone. Be sure to select MB Phone System.
5. Your phone should give you a confirmation message the pairing is complete.
6. Test phone by making a call through the vehicle.
7. Turn off the engine, be sure to take the key with you, exit the vehicle.

Technorati Tags: Bluetooth, cellphone, Mercedes, Mercedes-Benz, Pairing

This entry was posted on Tuesday, June 9th, 2009 at 12:40 pm and is filed under Avionics. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.